Recovering our Textile Archives

We have covered paper and are now onto our wonderful textile collection. The textile collection spans from the 16th century till present day and contains a diverse selection of works including woven samples from Donald Brothers Ltd., work by Robert Stewart, Kath Whyte, Fraser Taylor and many more. These collections suffered no direct damage from the fire, but some were exposed to water as the blaze was extinguished.

Fraser Taylor

Fraser Taylor Textile

Like any of the collections that were touched by water (or had the potential to be) the textiles were quickly removed from their original store. As would be expected all archive materials are packaged and wrapped in archival proof materials (in other words acid free packaging). In this case the textiles were wrapped in tyvec or boxed in acid free boxes that took the brunt of any water exposure.

Textiles Removed from the Mackintosh Building

Textiles Removed from the Mackintosh Building

Once removed from their original store these were then transferred to the Reid building so that the textiles could be dried, aired and re-packaged after being examined by conservators. While of course this incident was extremely unfortunate, it has afforded a unique opportunity to see all the textiles laid out at once.

Eskimo Dolls

 

Textiles being air dried

Textiles being air dried

 

Over the last couple of months these textiles have been dried using a combination of fans and dehumidifiers and were periodically examined by textile conservators. To these conservators, for the generous offer of their time and assistance we would like to thank volunteers from the:

-University of Glasgow, staff and students

-National Museum of Scotland

-and independent conservators

All of who advised on the state and repackaging of our textiles collections.

Textile conservator hard at work

Textile conservator hard at work

Through the work of such volunteers these textiles have now been repackaged and moved off site for storage.

All the textiles repackaged and labelled for off-site storage

All the textiles repackaged and labelled for off-site storage

Next week we will be moving on to the plaster casts.

Textile Conservation: The University of Brighton’s blog

We’ve recently come across The University of Brighton’s excellent Conserving the Archives blog. Because we have our very own collection of Stoddard-Templeton carpets and textiles, we were especially interested in their most recent post, which is actually a guest entry by Emily Austin. Emily is a Textile Conservation student at the University of Glasgow, who has recently completed a placement with Zenzie Tinker Conservation during June and got to work on some of the University of Brighton’s carpet samples…

Before I head off on a spot of annual leave, I have a bit of a treat for everyone – my very first ‘guest entry’ on this blog. In an earlier entry I wrote about the carpet samples in our collection that were going to be conserved at Zenzie Tinker Conservation. Emily Austin, a Textile Conservation student at the University of Glasgow, was completing a placement with Zenzie during June and got to work on our carpet samples. She very kindly agreed to write a blog entry about the processes and allow me to use her images for illustration. So here it is – parting ways with paper for a change!

Original label, University of Brighton Design Archives
Image: An original label hidden, until now, behind an award winning carpet designed by Artkurl Wilton, 1958.

“Recently while on a summer work placement at Zenzie Tinker’s Conservation studio, I was fortunate enough to be able to carry out the conservation treatment for two 1950’s carpet samples from the University of Brighton Design Archives.

Before treatment, carpet sample, University of Brighton Design Archives
Image: Prior to treatment, showing moth frass and dust and the original wooden frame.

When the carpet samples arrived it was clear that at some point they had been host to a large number of moths, no doubt attracted by the rich wool pile. The true extent of the infestation was realised once the metal tacks had been removed from the wooden boards on which the samples were mounted, revealing numerous moth casings. However, this also revealed the original manufacturing label on the yellow and black sample, shown in the image below. The samples were then prepared for freezing by sealing them in plastic sheeting; they were frozen for 72 hours at -30c to stop any live moth activity.

Removal of old cotton tape, carpet sample, University of Brighton Design Archives
Image: Removal of old cotton tape from the carpet sample.

Once the samples were removed from the freezer, they needed to be thoroughly surface cleaned to remove any remaining moth casings and frass (debris), which involved carefully working through the carpet pile with a low suction vacuum and tweezers. There were large amounts of casings especially on the black and blue sample, as well as areas where the pile had been completely eaten away. Interestingly, the moths seemed to focus mainly on the yellow areas of pile in this sample, perhaps because of a particular dye or treatment used on this wool.

New cotton tape, carpet sample, University of Brighton Design Archives
Image: Stitching new cotton tape.

During this process, it became apparent that the cotton tape stitched around the raw carpet edges was preventing the full removal of the moth frass, as well as containing failing adhesive which had become yellow and powdered. Therefore, it was decided to replace the old tape and change the large mismatched stitching with a more suitable colour thread spaced closer together.

New stitching, carpet sample, University of Brighton Design Archives
Image: New stitching.

Following discussions with Design Archives’ staff, the carpets were then prepared for mounting onto fabric covered boards. This involved the stitched attachment of Velcro strips to the top and bottom of each sample giving an even distribution of weight once they are mounted. Currently, the light weight polycarbonate and sealed plywood-faced boards are being covered and once completed they will also have Velcro attached to support the carpet pieces.

Stitching velcro, carpet sample, University of Brighton Design Archives
Image: New velcro stitching.

Overall, the treatment has greatly improved the appearance and stability of the carpet samples, which were in poor condition when they arrived at the studio. This has not only been important for the future study of the samples at the University of Brighton Design Archives but it has also been a great experience for me as I continue my Textile Conservation training at The University of Glasgow.”

Stitching velcro, carpet sample, University of Brighton Design Archives
Image: Emily stitching velcro onto the carpet sample designed by Artkurl Wilton.